1D Oxide Nanostructures Obtained by Sol-Gel and Hydrothermal Methods

About our links
Some links on this site are affiliate links. If you buy something through them, we may earn a small commission from the shop, at no extra cost to you. Prices and stock come from the shops and can change.
1D Oxide Nanostructures Obtained by Sol-Gel and Hydrothermal Methods
Springer Nature
46.00 € at SpringerLink Shop INT
Go to SpringerLink Shop INT

The price comes from the shop and can change. Check price, size and delivery on the shop's page before you order.

This book presents wet chemical sol-gel and hydrothermal methods for 1D oxide nanostructure preparation. These methods represent an attractive route to multifunctional nanomaterials synthesis, as they are versatile, inexpensive and, thus, appropriate for obtaining a wide range of oxide materials with tailored morphology and properties. Three specific oxides (SiO2, TiO2, ZnO) are discussed in detail in order to illustrate the principle of the sol-gel and hydrothermal preparation of 1D oxide nanostructures. Other oxides synthesized via this method are also briefly presented. Throughout the book, the correlation between the tubular structure and the physico-chemical properties of these materials is highlighted. 1D oxide nanostructures exhibit interesting optical and electrical properties, due to their confined morphology. In addition, a well-defined geometry can be associated with chemically active species. For example, the pure SiO2 nanotubes presented a slight photocatalytic activity, while the Pt-doped SiO2 tubular materials act as microreactors in catalytic reactions. In the case of titania and titanate nanotubes, large specific surface area and pore volume, ion-exchange ability, enhanced light absorption, and fast electron-transport capability have attracted significant research interest. The chemical and physical modifications (microwave assisted hydrothermal methods) discussed here improve the formation kinetics of the nanotubes. The ZnO nanorods/tubes were prepared as random particles or as large areas of small, oriented 1D ZnO nanostructures on a variety of substrates. In the latter case a sol-gel layer is deposited on the substrate prior to the hydrothermal preparation. Using appropriate dopants, coatings of ZnO nanorods with controlled electrical behavior can be obtained.

Categories: Synthesizer

You might also look at

MOOER Lofi Machine
MOOER Lofi Machine
62.90 €69.00 € at Muziker.com
Arbeit in einer alternden Gesellschaft
Arbeit in einer alternden Gesellschaft
54.99 € at SpringerLink Shop INT
Novation Impulse 25
Novation Impulse 25
159.00 € at Muziker.com
Arturia Microlab BL
Arturia Microlab BL
69.00 € at Muziker.com
Vom Recht auf den eigenen Tod
Vom Recht auf den eigenen Tod
27.99 € at SpringerLink Shop INT